US302 Range Extender Setup via Browser
First locate your extender mid-way between your router and where you want to boost your Wi-Fi.
Then hold on for moments until power LED turns stable on the MSRM repeater and connect it with your device like laptop/computer/phones, etc.
Now check out the Wi-Fi list and find MSRM default network name there. You might see “Wireless-N” or “WirelessAC“.
Once you find it then connect with that network name, for very first time it will not ask for any password to connect. Moreover, you will see “No internet” when you are connected to it.
Now launch browser on your device and in the address bar type http://apsetup.net or http://192.168.10.1 , wizard automatically pop up.
Now you need to select the mode as repeater/extender and click Next. It will take you to login page fill credentials as “admin” in both username and password.
Then, select the network you want to extend and type its password.
Make sure to complete the setup and after that, the MSRM US302 repeater will reboot which hardly takes 60 seconds.
Final step is to connect your devices to the new Wi-Fi network that you created (SSIDEXT).
lewis hamilton commented
Manually configuring a Linksys Wireless-N Range Extender
Connect your computer to the Ethernet port of your range extender using an Ethernet cable. ...
You will be prompted with a window asking for a username and password. ...
Click Wireless > Basic Wireless Settings.
Set the radio button to Manual then enter your router's Network Name (SSID).
WPA2/WPA Mixed Mode.